A total redesign of the dust shroud
shape was required to enable edging work
into corners without restriction and to
maintain dust control.
The steel construction dust shroud
features two edging sections – one at
the front and one at the side which are
covered for floor work by the hook and
loop attached cover seal that attaches
over the main seal.
When this is removed, grinding or
polishing of the edges is achieved with
no gap along the wall.
The inserts provided allow fast and
strong fitting to any 5” angle grinder
or 7” polisher while the hook and loop
attached main seal can be adjusted
without tools to provide the best
control of dust.
