|  Home   |   Email Us   |

Menu

Home
Silicosis
Dustless Technology
Dust Extraction Shrouds
Concrete Grinding Business
Concrete Grinder
Stand Up Edge Grinder
Floor Grinder
Concrete grinding
Polished Concrete
Grinder Burnout
Grinding Hard Concrete
Glazed Diamond Segments
Coating Removal
Angle Grinders
Concrete Grinding Equipment
Situp N Grind
Cornerhood Dust Extraction Shroud
Hoverhood Dust Extraction Shroud
Concrete Grinding Movies
Useful Links
Press Releases & Articles
Industry Awards
Contact Us

  Dustless Technology

We bring you the very best dustless technology for concrete grinding

Our dust extraction shrouds pick up more concrete dust than other brands

The combination of a strong, fixed position, steel dust shroud with an adjustable seal where all the air is forced in at floor level

picks up more dust

more easily

with less vacuum power.

Dust shroud with corner feature

Dustless technology for a superior dust shroud

 

These features make them easier to use and safer because they glide across the floor with no friction picking up all the dust.

The right air/dust mix

It is only when airflow is directed at floor level under the seal that the concrete dust is mixed properly with air and extracted via the outlet tube.

Non-metal flexible shrouds close off and seal the floor area which prevents the natural flow of air around the grinding wheel.

As the diamonds cut into the concrete air is drawn in at high velocity around the grinding wheel where the dust is generated and follows a spinning action outwards and upwards to the outlet tube which is strategically located and dimensioned to remove the dust in the most efficient manner.

Patent pending

Situp Product's dust shrouds also have patent-pending dustless technology for their edging feature. Most shrouds have a very large open area at the front for the purpose of grinding against a wall which can only operate dustless if they are connected to a large vacuum system. Situp Product's shrouds have sealed over this area except for a small opening where the grinding wheel protrudes which eliminates the need for a high powered vacuum for hand grinding.

This means that our shrouds will throw less dust when edging even if you are using a single motor vacuum dust collector.

More efficiency with less hose

We recommend that you use a vacuum hose of 35mm or 11/2 inch diameter. It is not necessary to use a heavy, larger hose because our dustless technology is more efficient. Smaller hoses are easier to use and eliminate "fighting" the hose which means more accurate grinding control and less fatigue.

 

Go to the next page "Dust Extraction Shrouds"